Product list corresponding to Machining center

Machining center products were found in the search.|Bunri is a specialized manufacturer of equipment that separates and discharges sludge and chips from grinding and cutting

14 products were found in the search.

Magnetic drum conveyor

Powerful magnetic drum conveyor MMS
Super strong magnetic drum conveyor M10
Powerful magnetic drum conveyor HMS
#30 Super strong magnetic drum conveyor M10

Microfiltration conveyor equipped with powerful magnetic drum.
Optimum for cutting chip processing of castings and iron.

Coolant Water soluble Oil-based
Category Magnetic material
Processing details Cutting
Work material FC/FCD Steel
Chip shape Sandy Cottony Granular Needle-shaped Small curl-shaped (50 mm or less)
Machine tool Machining center #30 Machining center Broaching machine Gear cutting machine Gun drill machine Cutting specialized machine Washing machine

Show Detail

Magnetic roller conveyor

Powerful magnetic roller conveyor RCC
Magnetic roller conveyor RC

Roller conveyor to perform filtration and chip transport using the magnetic drum.
A wide range of processing is possible; from long chips of about 100 mm to fine chips.

Coolant Water soluble Oil-based
Category Magnetic material
Processing details Cutting
Work material FC/FCD Steel
Chip shape Sandy Cottony Granular Needle-shaped Small curl-shaped (50 mm or less) Small curl-shaped (51 mm to 100 mm)
Machine tool Machining center Broaching machine Automation machine Gear cutting machine Gun drill machine Cutting specialized machine

Show Detail

Magnetic screw conveyor

Powerful magnetic screw conveyor SCC
Magnetic screw conveyor SC
Powerful vertical magnetic screw conveyor VS

Screw t ype conveyor using magnet.
The rotating part is not exposed, so this can be used safely and se curely.
Optimum for cutting chip processing of gear cut ting machines, broach machines, etc.

Coolant Water soluble Oil-based
Category Magnetic material
Processing details Cutting
Work material FC/FCD Steel
Chip shape Granular Small curl-shaped (50 mm or less)
Machine tool Machining center Broaching machine Gear cutting machine

Show Detail

Magnetic belt conveyor

Magnetic belt conveyor MB

Conveyor that conveys the tangled chips of magnetic material using the belt while adsorbing them with the magnet.
Optimum for processing tangled dumpling-shaped or curl-shaped chips.

Coolant Water soluble Oil-based
Category Magnetic material
Processing details Cutting
Work material FC/FCD Steel
Chip shape Long curl-shaped (101 mm or more) Dumpling-shaped
Machine tool Machining center NC lathes Automation machine Cutting specialized machine

Show Detail

Rolling filter conveyor

Rolling filter conveyor SAL

Double-conveyor-type punching filter conveyor.
Reduces the tank cleaning frequency.
Optimum for cutting chip processing of non-magnetic materials.

Coolant Water soluble Oil-based
Category Non-magnetic material
Processing details Cutting
Work material Aluminum Stainless Copper Titanium Magnesium Mixed chips (aluminum + FC or sintered metal)
Chip shape Granular Small curl-shaped (50 mm or less) Small curl-shaped (51 mm to 100 mm)
Machine tool Machining center Gun drill machine Cutting specialized machine

Show Detail

Drastic cleaning reduction for cutting coolant system

Drastic cleaning reduction for cutting coolant system SLC

Cutting chip processing system that combines the punching filter and a new cyclone filter in a unique configuration.
The cyclone filter filters cutting chips, so clean liquid can always be supplied to the machine.

Coolant Water soluble
Category Non-magnetic material
Processing details Cutting
Work material Aluminum Stainless Titanium Mixed chips (aluminum + FC or sintered metal)
Chip shape Granular Small curl-shaped (50 mm or less) Small curl-shaped (51 mm to 100 mm)
Machine tool Machining center Gun drill machine Cutting specialized machine

Show Detail

Rolling filter conveyor

Rolling filter conveyor AL
Rolling filter conveyor ALL
#30 Rolling filter conveyor SKA

Conveyor with punching filter that does not require backwashing.
The filter is automatically cleaned, reducing maintenance load.
Optimum for cutting chip processing of non-magnetic materials.

Coolant Water soluble Oil-based
Category Non-magnetic material
Processing details Cutting
Work material Aluminum Stainless Copper Titanium Magnesium Mixed chips (aluminum + FC or sintered metal)
Chip shape Granular Small curl-shaped (50 mm or less) Small curl-shaped (51 mm to 100 mm)
Machine tool Machining center #30 Machining center Broaching machine NC lathes Automation machine Gear cutting machine Gun drill machine Cutting specialized machine

Show Detail

Rolling filter conveyor

Rolling filter conveyor MAL

Conveyor that supports both magnetic and non-magnetic materials with a combination of magnet and punching filter.
Optimum for those who process both magnetic and non-magnetic materials using a single machine tool.

Coolant Water soluble Oil-based
Category Magnetic material Non-magnetic material
Processing details Cutting
Work material Mixed chips (aluminum + FC or sintered metal)
Chip shape Granular Small curl-shaped (50 mm or less) Small curl-shaped (51 mm to 100 mm)
Machine tool Machining center Broaching machine NC lathes Automation machine Gear cutting machine Gun drill machine Cutting specialized machine

Show Detail

Microfiltration filter conveyor

Microfiltration filter conveyor BAL

Precision drum filter conveyor with high-rigidity sintered material filter.
Optimum for cutting chip processing of non-magnetic materials.

Coolant Water soluble
Category Non-magnetic material
Processing details Cutting
Work material Aluminum Stainless Copper Titanium Magnesium
Chip shape Sandy Cottony Granular Needle-shaped Small curl-shaped (50 mm or less) Small curl-shaped (51 mm to 100 mm)
Machine tool Machining center Cutting specialized machine

Show Detail

Cyclone filter APOLLO-S

Cyclone filter APOLLO-S APS

Cyclone-type secondary processing unit that you can use extensively regardless of magnetic or non-magnetic materials.
Compatible with fine cutting chips and grinding sludge.
The defoaming mechanism supplies the non-foaming clean liquid.
The main body has been downsized while maintaining the filtration accuracy and defoaming mechanism of the old type.

Coolant Water soluble Oil-based
Category Magnetic material Non-magnetic material
Processing details Grinding Cutting
Work material FC/FCD Steel Aluminum Stainless Copper Titanium Carbide Mixed chips (aluminum + FC or sintered metal)
Chip shape Sandy
Grinding chip size Ultrafine particles (5 μm to 10 μm) Fine particles (10 μm to 100 μm) Coarse particles (0.1 mm to 0.5 mm)
Machine tool Grinding machine Tool grinding machine Machining center NC lathes Induction hardening machine Cutting specialized machine Washing machine

Show Detail

Bunri filter

Bunri filter RBF

Bag-filter-type filtration unit with a simple structure and high-precision filtration.
Optimum as a secondary filtration filter for cutting and grinding.

Coolant Water soluble Oil-based
Category Magnetic material Non-magnetic material
Processing details Grinding Cutting
Work material FC/FCD Steel Aluminum Stainless Copper Titanium Carbide Magnesium Mixed chips (aluminum + FC or sintered metal)
Chip shape Sandy Cottony Granular Needle-shaped
Grinding chip size Ultrafine particles (5 μm to 10 μm) Fine particles (10 μm to 100 μm) Coarse particles (0.1 mm to 0.5 mm)
Machine tool Grinding machine Tool grinding machine Saving machine Honing machine Super finishing machine (Super finisher) Thread rolling machine Machining center Broaching machine NC lathes Automation machine Gear cutting machine Gun drill machine Induction hardening machine Cutting specialized machine Washing machine

Show Detail

Chain bucket skimmer

Chain bucket skimmer CBS

Approximately seven times the recovery capacity of the belt system*.
Oil skimmer that uses the unique bucket system.
Optimum for collecting floating oil and scum.
* In-house ratio.

Coolant Water soluble
Category Floating oil, scum
Machine tool Grinding machine Tool grinding machine Saving machine Honing machine Super finishing machine (Super finisher) Thread rolling machine Machining center #30 Machining center Broaching machine NC lathes Automation machine Gear cutting machine Gun drill machine Induction hardening machine Cutting specialized machine Washing machine

Show Detail

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.