Cyclone filter APOLLO-S｜Bunri is a specialized manufacturer of equipment that separates and discharges sludge and chips from grinding and cutting

Cyclone filter APOLLO-S APS

Cyclone-type secondary processing unit that you can use extensively regardless of magnetic or non-magnetic materials.
Compatible with fine cutting chips and grinding sludge.
The defoaming mechanism supplies the non-foaming clean liquid.
The main body has been downsized while maintaining the filtration accuracy and defoaming mechanism of the old type.

＜PATENTED＞

Features

Cyclone-type secondary filtration equipment that deals with coolant containing fine chips and sludge.
It has a built-in defoaming mechanism that suppresses the foaming of clean liquid.
By combining this equipment with the settlement tank or the settlement tank for conveyor type, drained chips and sludge can be discharged.
By standardizing the “drain part exchange type” for wear countermeasures, even if the drain discharge part wears over time due to sludge of hard materials, you can use it for a long time by replacing parts.
The main unit has been made approximately 40% smaller while maintaining the filtration accuracy and defoaming mechanism of the old type. As a result, the motor capacity of the supply pump can be reduced by 40-50%.
This product does not use any consumables such as cartridge filters or paper filters, so no industrial waste is generated.

Coolant	Water soluble Oil-based
Category	Magnetic material Non-magnetic material
Processing details	Grinding Cutting
Work material	FC/FCD Steel Aluminum Stainless Copper Titanium Carbide Mixed chips (aluminum + FC or sintered metal)
Chip shape	Sandy
Grinding chip size	Ultrafine particles (5 μm to 10 μm) Fine particles (10 μm to 100 μm) Coarse particles (0.1 mm to 0.5 mm)
Machine tool	Grinding machine Tool grinding machine Machining center NC lathes Induction hardening machine Cutting specialized machine Washing machine

Mechanism

The dirty liquid flows into the main body due to the action of the APOLLO supply pump.
The dirty liquid is rotated at high speed inside the main body, and chips and sludge are separated by centrifugal force.
The separated chips and sludge are discharged from the drain port at the bottom of the main body.
The foam is taken out of the clean liquid when it passes through the gas-liquid separation pipe and sent to the outside of the main body.