Product list corresponding to Machine tool

Machine tool products were found in the search.|Bunri is a specialized manufacturer of equipment that separates and discharges sludge and chips from grinding and cutting

19 products were found in the search.

Magnetic separator Phoenix NEO

Magnetic separator Phoenix NEO

Magnetic separator using rare earths, which has about 10 times the magnetic energy* of ferrite.
By renewing the drive mechanism of the magnetic separator, there is no wear due to sludge or abrasive grains.
A lineup of four models is provided to suit your requirements.

Coolant Water soluble Oil-based
Category Magnetic material
Processing details Grinding
Work material FC/FCD Steel
Chip shape Sandy Cottony Granular Needle-shaped
Grinding chip size Ultrafine particles (5 μm to 10 μm) Fine particles (10 μm to 100 μm) Coarse particles (0.1 mm to 0.5 mm)
Machine tool Grinding machine Tool grinding machine Saving machine Honing machine Super finishing machine (Super finisher) Thread rolling machine Induction hardening machine Washing machine

Show Detail

Drastic cleaning reduction for grinding coolant system

Drastic cleaning reduction for grinding coolant system RTG

Grinding system equipped with a new magnetic separator and a new cyclone filter in a uniquely designed tank structure.
Optimum for grinding sludge processing of magnetic materials.

Coolant Water soluble
Category Magnetic material
Processing details Grinding
Work material FC/FCD Steel
Chip shape Sandy Cottony
Grinding chip size Ultrafine particles (5 μm to 10 μm) Fine particles (10 μm to 100 μm) Coarse particles (0.1 mm to 0.5 mm)
Machine tool Grinding machine Tool grinding machine

Show Detail

Drastic cleaning reduction for grinding coolant system

Drastic cleaning reduction for grinding coolant system ALG

Grinding system with a new cyclone filter mounted on the uniquely designed tank.
Optimum for grinding sludge processing of non-magnetic materials.

Coolant Water soluble
Category Non-magnetic material
Processing details Grinding
Work material Aluminum Stainless Copper Titanium Mixed chips (aluminum + FC or sintered metal)
Chip shape Sandy
Grinding chip size Ultrafine particles (5 μm to 10 μm) Fine particles (10 μm to 100 μm) Coarse particles (0.1 mm to 0.5 mm)
Machine tool Grinding machine

Show Detail

Drastic cleaning reduction for grinding coolant system COMPACT

Drastic cleaning reduction for grinding coolant system COMPACT CPT

Grinding system with a new cyclone filter mounted on the uniquely designed tank.
Optimum for grinding sludge processing of non -magnetic materials.

Coolant Water soluble
Category Magnetic material Non-magnetic material
Processing details Grinding
Work material FC/FCD Steel Aluminum Stainless Copper Titanium Mixed chips (aluminum + FC or sintered metal)
Chip shape Sandy
Grinding chip size Ultrafine particles (5 μm to 10 μm) Fine particles (10 μm to 100 μm) Coarse particles (0.1 mm to 0.5 mm)
Machine tool Grinding machine

Show Detail

Ultra-precision filtration coolant system

Ultra-precision filtration coolant system SB Filter YA

Ultra-precision filtration system that uses steel balls as the filter medium.
The filter media is automatically cleaned by performing operations on the touch panel.
Optimum for grinding sludge processing on honing machines and super-finishing machines.

Coolant Water soluble Oil-based
Category Magnetic material
Processing details Grinding
Work material FC/FCD Steel
Grinding chip size Ultrafine particles (5 μm to 10 μm) Fine particles (10 μm to 100 μm)
Machine tool Honing machine Super finishing machine (Super finisher)

Show Detail

Magnetic drum conveyor

Powerful magnetic drum conveyor MMS
Super strong magnetic drum conveyor M10
Powerful magnetic drum conveyor HMS
#30 Super strong magnetic drum conveyor M10

Microfiltration conveyor equipped with powerful magnetic drum.
Optimum for cutting chip processing of castings and iron.

Coolant Water soluble Oil-based
Category Magnetic material
Processing details Cutting
Work material FC/FCD Steel
Chip shape Sandy Cottony Granular Needle-shaped Small curl-shaped (50 mm or less)
Machine tool Machining center #30 Machining center Broaching machine Gear cutting machine Gun drill machine Cutting specialized machine Washing machine

Show Detail

Magnetic roller conveyor

Powerful magnetic roller conveyor RCC
Magnetic roller conveyor RC

Roller conveyor to perform filtration and chip transport using the magnetic drum.
A wide range of processing is possible; from long chips of about 100 mm to fine chips.

Coolant Water soluble Oil-based
Category Magnetic material
Processing details Cutting
Work material FC/FCD Steel
Chip shape Sandy Cottony Granular Needle-shaped Small curl-shaped (50 mm or less) Small curl-shaped (51 mm to 100 mm)
Machine tool Machining center Broaching machine Automation machine Gear cutting machine Gun drill machine Cutting specialized machine

Show Detail

Magnetic screw conveyor

Powerful magnetic screw conveyor SCC
Magnetic screw conveyor SC
Powerful vertical magnetic screw conveyor VS

Screw t ype conveyor using magnet.
The rotating part is not exposed, so this can be used safely and se curely.
Optimum for cutting chip processing of gear cut ting machines, broach machines, etc.

Coolant Water soluble Oil-based
Category Magnetic material
Processing details Cutting
Work material FC/FCD Steel
Chip shape Granular Small curl-shaped (50 mm or less)
Machine tool Machining center Broaching machine Gear cutting machine

Show Detail

Magnetic belt conveyor

Magnetic belt conveyor MB

Conveyor that conveys the tangled chips of magnetic material using the belt while adsorbing them with the magnet.
Optimum for processing tangled dumpling-shaped or curl-shaped chips.

Coolant Water soluble Oil-based
Category Magnetic material
Processing details Cutting
Work material FC/FCD Steel
Chip shape Long curl-shaped (101 mm or more) Dumpling-shaped
Machine tool Machining center NC lathes Automation machine Cutting specialized machine

Show Detail

Rolling filter conveyor

Rolling filter conveyor SAL

Double-conveyor-type punching filter conveyor.
Reduces the tank cleaning frequency.
Optimum for cutting chip processing of non-magnetic materials.

Coolant Water soluble Oil-based
Category Non-magnetic material
Processing details Cutting
Work material Aluminum Stainless Copper Titanium Magnesium Mixed chips (aluminum + FC or sintered metal)
Chip shape Granular Small curl-shaped (50 mm or less) Small curl-shaped (51 mm to 100 mm)
Machine tool Machining center Gun drill machine Cutting specialized machine

Show Detail

Drastic cleaning reduction for cutting coolant system

Drastic cleaning reduction for cutting coolant system SLC

Cutting chip processing system that combines the punching filter and a new cyclone filter in a unique configuration.
The cyclone filter filters cutting chips, so clean liquid can always be supplied to the machine.

Coolant Water soluble
Category Non-magnetic material
Processing details Cutting
Work material Aluminum Stainless Titanium Mixed chips (aluminum + FC or sintered metal)
Chip shape Granular Small curl-shaped (50 mm or less) Small curl-shaped (51 mm to 100 mm)
Machine tool Machining center Gun drill machine Cutting specialized machine

Show Detail

Rolling filter conveyor

Rolling filter conveyor AL
Rolling filter conveyor ALL
#30 Rolling filter conveyor SKA

Conveyor with punching filter that does not require backwashing.
The filter is automatically cleaned, reducing maintenance load.
Optimum for cutting chip processing of non-magnetic materials.

Coolant Water soluble Oil-based
Category Non-magnetic material
Processing details Cutting
Work material Aluminum Stainless Copper Titanium Magnesium Mixed chips (aluminum + FC or sintered metal)
Chip shape Granular Small curl-shaped (50 mm or less) Small curl-shaped (51 mm to 100 mm)
Machine tool Machining center #30 Machining center Broaching machine NC lathes Automation machine Gear cutting machine Gun drill machine Cutting specialized machine

Show Detail

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.